01.
DIAPHRAGM
COMPRESSOR
CLEAN AND SPECIALTY
HYDROGEN, SPECIALTY GAS COMPRESSION SOLUTION
35 full time employees with combined 150 plus years experience in the high-pressure industry
Located about 30 miles northwest of Philadelphia, in Ivyland, PA
16,000 Square feet of manufacturing space
All Engineering, assembly, and testing of compressor are done in Fluitron Shop.
Fluitron is dedicated to complete customer satisfaction.
Providing excellent customer service in world wide countries.
Complete Gas Tightness
Contamination-Free
Oil-Free Operation
High discharge pressure
High Pressure Ratio
All gas seal are static seal (No Moving Parts)
High Purity Product
Toxic, Explosive and Ultra-High Purity Gas can be available
The metal diaphragm group, which separates the process gas from the pulsing oil, is sealed at the edge and restrained to move and deflect into carefully contoured cavities.
The process gas flows into the compressor during the suction stroke through the suction check valve. The compressed gas passes out of the compressor through the discharge check valve.
The diaphragms move in response to the movement of the oil, which is pulsed by the piston. The base crosshead is shown fitted with a reduced diameter hydraulic piston that displaces the pulsing oil at the required operating pressure.
Frame | Max. Power (kW) |
Config | Rod Load(Kgf) |
Max. RPM |
Max. Pressure (Bar G) |
---|---|---|---|---|---|
Y7 | 100 | Vertical | 5000 | 600 | 2000 |
Y7H | 150 | Vertical | 8000 | 600 | 2000 |
Y7 | 150 | Horizontal | 10000 | 600 | 2000 |
Y7H | 375 | Horizontal | 17000 | 600 | 2000 |
Frame | Max. Power (kW) |
Config | Rod Load(Kgf) |
Max. RPM |
Max. Pressure (Bar G) |
---|---|---|---|---|---|
D5 | 10 | Vertical | 1500 | 600 | 2000 |
D1 | 15 | Vertical | 1500 | 600 | 2000 |
Frame | Max. Power (kW) | Config | Rod Load (Kgf) | Max.RPM |
---|---|---|---|---|
A1 | 5 | Vertical | 550 | 600 |
A2 | 7.5 | Vertical | 1000 | 600 |
Model | Max. Discharge Pressure PSIG (BarG) | Max. Flow Rate Nm3/hr |
---|---|---|
A-1400 | 20,000(1,400) | 0.03 |
A-1000 | 15,000(1,000) | 0.044 |
A-700 | 10,000(700) | 0.075 |
A-400 | 6,000(400) | 0.13 |
A-200 | 3,000(200) | 0.27 |
A-150 | 2,000(150) | 0.44 |
A-70 | 1,000(70) | 0.95 |
A-35 | 500(35) | 2 |
A-20 | 300(20) | 3 |
A-15 | 200(15) | 4.25 |
A-9 | 130(9) | 6.45 |
Frame | Max. Power (kW) | Configuration | Rod Load (Kgf) | Max.RPM |
---|---|---|---|---|
S1 | 2 | Vertical | 275 | 600 |
Model | Max. Discharge Pressure PSIG (BarG) | Max. Flow Rate Nm3/hr |
---|---|---|
S1-15 | 200(15) | 2.7 |
S1-20 | 300(20) | 0.7 |
S1-35 | 500(35) | 0.5 |
S1-70 | 1,000(70) | 0.25 |
S1-150 | 2,000(150) | 0.1 |
S1-200 | 3,000(200) | 0.08 |
S1-400 | 6,000(400) | 0.034 |
S1-700 | 10,000(700) | 0.015 |